SureFit systems may interfere with some OEM radios or in-dash speakers. Some installations may require addi-tional engine pulleys not included with kits.You must provide pulleys, V-belts, heater hoseand refrigerant. Complete Gen IV kit for 1969 Firebird Shown. Put just the socket on the plugs and you should be able to get an open end or box wrench on the socket's hex head. Vintage Air » Blog Archive FIREBIRD 1967 Thru 1981 - Vintage Air. You cannot use the ratchet wrench on those rear plugs because of the lack of clearance. It comes equipped with carefully sized, large, separate A/C and Heat coils just like factory (OE) systems, not combined A/C, Heat coils often found on aftermarket systems. Those two rear plugs were what I was referring to before. This Perfect Fit Smart Series 1969 Firebird air conditioning system is engineered to fit perfectly. I can imagine the grief of stripping the threads. Then make sure it treads way in before tightening it down. I try not to drag the electrodes over any crud that could get pushed into the cylinder. I put the plug into the socket and carefully position it into the engine. There should then be just enough room then to put a longer extension and a ratchet on it. Approach the plug with the socket at an angle and by the time you get to the hex the socket should be far enough on that you can straighten it up and push it onto the plug nut. Will also work on all 1965-79 Pontiac 350 / 389 / 400 / 428 and 455 engine, but is correct for 1969 - (engines that are from 1972 or newer must use Felpro gasket 1233). Have you tried working just the socket onto the plug? It should go over the thin end of the plug coming at it at an angle.įor the front one by that bracket, I put a short extension on the socket to better hold onto it.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |